AS5000-PP · 7-stage reverse osmosis

AS5000 7-stage reverse osmosis system – with Permeate-pump

We bring the water source straight to your home – with the new AS5000 in a fresh and modern design. The cheapest water filter system with a storage tank that can do more than you need.

Why should we filter water?

Despite strict inspections by the waterworks, our tap water is often still contaminated with numerous of pollutants that we pour into our water glass every day. It could be a high nitrate content in the water, old pipelines in the streets or drug residues in the groundwater – we cannot control the route from the waterworks to your home. Pollutants that we cannot see with our eyes ultimately end up back in your tap water. We at SAFEWATER therefore recommend an additional filtration, through reverse osmosis, in order to really filter out all undesirable pollutants from the tap water. We love the best water quality and want you to be able to enjoy this quality too. Whether for yourself, for the youngest or the oldest – treat yourself to the BEST. Our AS5000 osmosis system provides you with clean water at all times. The secret lies in the natural process of osmosis. Tiny dirt particles and microscopic impurities are filtered out of the tap water without exception through the finest membranes. In this way, the best water quality is always available to you.

The AS5000 is the latest generation of reverse osmosis systems. A high-quality construction with quality components and an effective mode of operation ensure that fresh water is always available – completely free of foreign bodies and pollutants. The osmosis filter process saves energy, as only increased water pressure (min. 3 bar) is required for operation. If a booster pump is required, SAFEWATER naturally has the right solution as well as other accessories in its range – at favorable prices!

What we filter with:

Thanks to the finest filters and a high-quality membrane, pollutants such as lead, germs, viruses and micro-plastic particles are filtered out of the tap water – so that you can access clean, natural and germ-free water every day.

SAFEWATER Filter:

Filter 1 | Sediment filter (5 micron) This filter traps coarse particles such as rust, sand and dirt in the water.

Filter 2 | Activated carbon filter (GAC) The activated carbon filter ensures that pollutants such as chlorine, lead or other heavy metals and chemical residues are filtered out.

Filter 3 | Sediment filter (1 micron) The third filter stage filters out the elements that are not visible to the naked eye. These can be microparticles, carbon particles and microplastics that float in the water.

High-performance membrane (1 x 50 GPD) This high-performance membrane ensures perfect filtration of the water and removes up to 99% of all remaining foreign bodies in the water.

TANK (8 litres) After filtration, the water is temporarily stored in the 8 litre tank. The tank has a food-grade rubber bladder inside that prevents contact with the housing.

Activated carbon post-filter The so-called 5 stage is occupied by the activated carbon post-filter (post-carbon filter). This prepares the filtered water in the tank one last time before you pour it into your drinking glass. You can optionally add a sixth and seventh filter stage to further optimize the filtration and perfect the water quality.

Vitalisation filter | Vitalizes and invigorates your water

Energising filter | Water refinement in 4 stages

If we bring water from nature to the surface of the earth in an artificial way, we take it from its natural environment in a still immature state. Water also has to mature and go through various phases in order to achieve optimal water quality. It moves in a spiral and is only activated by its turbulence, e.g. through rocks, enriched with oxygen and minerals and energetically charged, until it eventually makes its way to the surface of the earth. The artificially created transport route over long pipe systems and under high pressure changes the water and its natural structure and loses important nutrients. Our energising filter causes your filtered tap water to swirl again and to add trace elements of important nutrients. A natural water structure, for example, is more easily absorbed by the body’s cells, which in turn ensure that the body runs smoothly. After your filter system has filtered out all pollutants, germs and bacteria, but also ingredients, the energising filter gives you back some natural and important ingredients of the water that can be lost in the filter process. The 4in1 filter creates a natural process in an artificial way, as can also be found in nature. Enrich yourself and your tap water – you will taste the difference.

With SAFEWATER permeate pump

Faster production against existing tank pressure No loss of efficiency over the entire filling process better water quality from the system saves up to 85% of the water that other systems send down the drain Saves 85% wear on pre-filters and booster pumps allows full line pressure in the tank allows the use of smaller components allows the use of home appliances in commercial applications normally reserved for expensive industrial systems How does the SAFEWATER permeate pump work? The Aquasafe permeate pump uses the energy of the wastewater from the RO system to pump the cleaned permeate into the pressure tank. It does not require any electrical energy. The permeated pump is driven by the hydraulic energy that normally goes unused down the drain. This decouples the tank from the RO membrane, which can then work like a pressureless tank.

More benefits:

LARGE QUANTITIES OF FILTERED WATER – THANKS TO THE STORAGE TANK

Do you need large quantities of filtered water for cooking? Or do you have several guests visiting whom you would like to demonstrate your water quality to? Then the 8 litre storage tank can provide you with up to 2 litres of filtered water per minute. This is a great advantage when things have to be done quickly.

NO ELECTRICAL CONNECTION REQUIRED

Unlike a direct flow system, the AS5000 runs entirely without electricity. Save electricity costs and use the power of water for filtration.

INSTALLATION – NATURALLY EASY!

We have further simplified the installation process of the system. A high quality manual with colour pictures will help you with the installation. The colour hoses and the markings on the system allow installation to be carried out quickly and easily. If you have any questions about the installation, one of our technicians will always be happy to help.

AS STANDARD WITH AQUASTOP

The scope of delivery includes an additional AQUASTOP including a replacement pad, which ensures even more safety in the system. As soon as water unexpectedly flows out of the system, the AQUASTOP trips and thus prevents the water from escaping any further. This prevents major water damage.

THE TAP IS INCLUDED FOR FREE

The high-quality 1-way faucet is already included in the scope of delivery. Install it on your sink next to the tap and enjoy filtered water from your stainless steel tap. You will of course receive instructions on how to install it.

Technical specifications:

Filter | 3 filter levels

Membranes | 1x 50 GPD membrane

Post filter | Activated carbon

Vitalisationfilter | Stage 6

Energizationfilter | Stage 7

Tank | 8 litres (height 34 cm, diameter: 22 cm)

Filtration | approx. 2 litres flow rate per minute (with full tank)

Dimensions | Length: 35 cm x width: 14.5 cm x height: approx. 30 cm Max.

Pressure | 5 bar Max.

Temperature | 65 degrees

Certified | NSF, ISO, CE, TÜV *

Package contents:

• AS5000 | Water filter system with storage tank / reverse osmosis system

• 1 x sediment filter 5 micron | First stage

• 1 x activated carbon filter | Second stage

• 1 x sediment filter 1 micron | Third stage

• 1 x AQUASAFE high-performance membrane | 50 GPD

• 1 x activated carbon post-filter | Fifth stage

• 1 x vitalisation filter | Sixth stage

• 1 x energization filter | Seventh stage

• 1 x permeate-pump | by AQUASAFE

• 1 x water storage tank | 8 litres

• 1 x stainless steel faucet | 1-way

• Long, colour-coded connection hoses

• Mounting and connection accessories | Cold-water connection and drain clamp

• Pre-filter and membrane housing key | Solid design

• Detailed operating instructions | With colour pictures and interesting tips

• AQUASTOP | Incl. Replacement pad

We recommend the filter change:

The pre-filter, every 6 months.

The post-filter, every 6 months.

The additional filter every 12 months.

The membrane every 2 years.